Tcl Windows API extension

This module provides commands to retrieve various network-related data for the local system including DNS and DHCP information, type and configuration of network interfaces, traffic statistics and various other information. The module also provides some client side name resolution lookup functions including nonblocking name and address lookups. Many of these commands and some options are not available on all platforms as noted in each command description.

Commands

address_to_hostname IPADDRESS ?-async SCRIPT? ?-flushcache?

Attempts to map the specified Internet address IPADDRESS to its fully qualified DNS name (FQDN).

If the -async option is not specified, the command returns the FQDN if available and the empty string otherwise. Note that this is a blocking call and the Tcl event loop will not be run until the command returns.

If the -async option is specified, the command returns right away. The address resolution is done in the background and when completed, SCRIPT is called at the global scope. Three additional arguments are appended to the script before it is executed - IPADDRESS, status success or fail and either the FQDN (when the status is success) or the Winsock error code (when the status is fail). The Winsock error code may be translated to an error string using the map_windows_error command. If no names are found, the status is success but the third argument will be an empty string.

Note the -async option requires a threaded build of Tcl and will raise an exception on non-threaded builds.

Internally, the command maintains a cache of address to hostname mappings so as to avoid unnecessary lookups. The result is normally returned from here if available. However, if the -flushcache option is specified, the cache entry is deleted and an explicit lookup up is done.

flush_arp_tables ?INTERFACEINDEX...?

Flushes the ARP tables associated with the specified network interfaces. If no arguments are specified, all interfaces are flushed.

get_arp_table ?options?

Returns the entries in the system's ARP table. Each entry is a sublist consisting of four elements - the interface index, the hardware address, the IP address and the type. The type is one of dynamic, static, other or invalid. Note the hardware address may be empty, for example when the associated interface is the loopback adapter.

The following options control the returned data:

-ifindex INTERFACEINDEX	Limits the returned entries to those in the ARP table for the specified network interface with index INTERFACEINDEX.
-sort	Returns the entries sorted by interface index, then IP address.
-validonly	Skips entries that are marked invalid.

get_ip_addresses

Returns a list of IP addresses for the system.

get_netif_count

Returns the number of network interfaces in the system.

get_netif_indices

Network interfaces in the system are identified by integer indices. This command retrieves the list of network interfaces in the system.

get_netif_info NETWORKINTERFACE ?options?

Returns various information about the configuration of a network interface. NETWORKINTERFACE must be the index of a network interface or a name identifying the interface.

The information returned depends on the options specified and is in the form of a flat list of the form "option1 value1 ...". If a specific option is not valid or relevant for the interface, it is omitted from the returned fields.

The following options may be specified:

-adapterdescription	Returns a description of the adapter associated with the interface. This option is supported on Windows 2000 and higher.
-adapterindex	Returns the index of the adapter associated with the interface. This option is supported on Windows 2000 and higher.
-adaptername	Returns the name of the adapter associated with the interface. This option is supported on Windows 2000 and higher.
-adminstatus	Returns 1 or 0 depending on whether the interface has been administratively enabled or not.
-all	Returns all option values.
-autoconfigactive	Returns 1 if the interface has been autoconfigured with an address, and 0 otherwise. This option is supported on Windows 2000 and higher.
-autoconfigenabled	Returns 1 if autoconfiguration is enabled on the interface if a DHCP server cannot be found, and 0 otherwise. This option is supported on Windows 2000 and higher.
-defaultgateway	Returns the address of the default gateway on the interface. This option is supported on Windows 2000 and higher.
-description	Returns a description of the interface.
-dhcpenabled	Returns 1 if DHCP is enabled on the interface, else 0. This option is supported on Windows 2000 and higher.
-dhcpleaseend	Returns the time, in seconds since Jan 1, 1970, that the DHCP lease will expire. This option is supported on Windows 2000 and higher.
-dhcpleasestart	Returns the time, in seconds since Jan 1, 1970, that the DHCP lease was obtained. This option is supported on Windows 2000 and higher.
-dhcpserver	Returns the address of the DHCP server on the network interface. This option is supported on Windows 2000 and higher.
-dnsservers	Returns a list of DNS servers on that interface. This option is supported on Windows 2000 and higher.
-havewins	Returns 1 if the interface uses WINS, else 0. This option is supported on Windows 2000 and higher.
-ifindex	Returns the interface index. This is the same as INTERFACEINDEX unless the latter is specified as a name.
-ifname	Returns the name of the network interface.
-inbytes	Returns the number of bytes received through this interface.
-indiscards	Returns the number of incoming packets on this interface that were discarded even though they had no errors.
-inerrors	Returns the number of incoming packets on this interface that were discarded because of errors.
-innonunicastpkts	Returns the number of broadcast or multicast packets received through this interface.
-inunicastpkts	Returns the number of unicast packets received through this interface.
-inunknownprotocols	Returns the number of incoming packets on this interface that were discarded because of the protocol was unknown.
-laststatuschange	Returns the last time the operational status changed.
-ipaddresses	Returns a list sublists containing the IP addresses and masks for the interface.
-mtu	Returns the maximum transmission unit of the interface.
-operstatus	Returns the operational status of the interface. This is one of the values nonoperational, wanunreachable, disconnected, wanconnecting, wanconnected, operational.
-outbytes	Returns the number of bytes transmitted through this interface.
-outdiscards	Returns the number of outgoing packets on this interface that were discarded even though they had no errors.
-outerrors	Returns the number of outgoing packets on this interface that were discarded because of errors.
-outnonunicastpkts	Returns the number of broadcast or multicast packets transmitted through this interface.
-outqlen	Returns the output queue length on this interface.
-outunicastpkts	Returns the number of unicast packets transmitted through this interface.
-physicaladdress	Returns the physical address of the network interface.
-primarywins	Returns the address of the primary WINS server, if any.
-reassemblysize	Returns the maximum size of a reassembled packet that is supported by the interface.
-secondarywins	Returns the address of the secondary WINS server, if any.
-speed	Returns the speed of the network interface in bits per second.
-type	Returns the network interface type. This is one of ethernet, tokenring, fddi, ppp, loopback, slip or other.

get_network_info ?options?

Returns various information about network configuration. The information returned depends on the options specified and is in the form of a flat list of the form "option1 value1 ...". The following options may be specified:

-all	Returns all values.
-arpproxyenabled	Returns 1 if ARP proxying is enabled and 0 otherwise.
-dhcpscopeid	Returns the DHCP scope id.
-dnsenabled	Returns 1 if DNS name resolution is enabled on the system and 0 otherwise.
-dnsservers	Returns a list of DNS server addresses used for name resolution.
-domain	Returns the system domain.
-hostname	Returns the host name of the system.
-routingenabled	Returns 1 if routing is enabled on the system and 0 otherwise.

get_outgoing_interface DESTADDR

Returns the index of the network interface that will be used to send a packet to the IP address specified by DESTADDR

get_route ?options?

Returns the best route to a specified destination. The following options may be specified:

-dest DESTADDR	Specifies the destination address for which the route is to be returned. If unspecified, defaults to 0.0.0.0 which corresponds to the default route.
-source SRCADDR	Specifies the source address to be used. This can affect the route selected. Defaults to 0.0.0.0 which indicates the source address should not affect which route is selected.

The returned information is a keyed list with the following fields:

-addr	The destination address that together with the -mask field specifies the address range to which the route applies.
-age	The age of the route in seconds. This is valid only if the Routing and Remote Access service is running and the protocol is netmgmt.
-ifindex	The interface index for this route.
-mask	The network mask that together with -dest specifies the address range to which the route applies.
-metric1	A routing protocol specific metric value.
-metric2	A routing protocol specific metric value.
-metric3	A routing protocol specific metric value.
-metric4	A routing protocol specific metric value.
-metric5	A routing protocol specific metric value.
-nexthop	The IP address of next hop in the route to the destination.
-nexthopas	The autonomous system number of the next hop.
-policy	Multi-path route selector condition, typically in IP TOS format as defined in RFC 1354.
-protocol	Protocol that generated the route.
-type	The type of the route. This is one of local, remote, other or invalid.

get_routing_table ?-sort?

Returns the network routing table as a list of routes. Each element of the route is in the format described in the get_route command description.

get_tcp_connections ?options?

Retrieves information about currently active TCP connections similar to the Windows netstat command. The return value is a list of sublists, each corresponding to a single connection.

The information returned for each connection is a flat list of the form "option1 value1 ...". The information returned for each connection is controlled through the following options:

-all	Returns all fields for a connection. This option is assumed if no other field option is specified.
-bindtime	Returns the time at which the last bind operation was done on the socket, or 0 if no bind has been done. On some platforms, this may not be available in which case, an empty string is returned for the value.
-localaddr	Returns the local address being used for the connection.
-localport	Returns the local port number being used for the connection.
-modulename	Returns the name of the process module that owns the socket. On some platforms, this may not be available in which case, an empty string is returned for the value.
-modulepath	Returns the path to the process module that owns the socket. On some platforms, this may not be available in which case, an empty string is returned for the value.
-pid	Returns the PID of the process communicating on the port. On some platforms, this may not be available in which case, an empty string is returned for the value.
-remoteaddr	Returns the address of the remote end of the connection.
-remoteport	Returns the port number of the remote end of the connection.
-state	Returns the connection state. This is one of closed, listen, syn_sent, syn_rcvd, estab, fin_wait1, fin_wait2, close_wait, closing, last_ack, time_wait or delete_tcb.

In addition, the connections for which information is returned may be filtered through the following options. Only those connections that match the specified criteria are returned.

-matchlocaladdr HOSTLIST	Only returns those connections whose local address is one of those specified in HOSTLIST. Each element of HOSTLIST may be either an IP address or a host name.
-matchlocalport PORTNUMBER	Only returns those connections whose local port is the specified number.
-matchpid PID	Only returns those connections owned by the process with the specified PID. On platforms where the PID is not available, specifying this option will generate an error.
-matchremoteaddr HOSTLIST	Only returns those connections whose remote address is one of those specified in HOSTLIST. Each element of HOSTLIST may be either an IP address or a host name.
-matchremoteport PORTNUMBER	Only returns those connections whose remote port is PORTNUMBER.
matchstate STATELIST	Only returns those connections whose state is one those specified in STATELIST which should be a list of connection state values (see above).

get_udp_connections ?options?

Retrieves information about currently active UDP sockets similar to the Windows netstat command. The return value is a list of sublists, each corresponding to a single open socket.

The information returned for each connection is a flat list of the form "option1 value1 ...". The fields returned for each connection is controlled through the following options:

-all	Returns all fields for a connection. This option is assumed if no other field option is specified.
-bindtime	Returns the time at which the last bind operation was done on the socket, or 0 if no bind has been done. On some platforms, this may not be available in which case, an empty string is returned for the value.
-localaddr	Returns the local address being used for the connection.
-localport	Returns the local port number being used for the connection.
-modulename	Returns the name of the process module that owns the socket. On some platforms, this may not be available in which case, an empty string is returned for the value.
-modulepath	Returns the path to the process module that owns the socket. On some platforms, this may not be available in which case, an empty string is returned for the value.
-pid	Returns the PID of the process communicating on the port. On some platforms, this may not be available in which case, an empty string is returned for the value.

In addition, the connections for which information is returned may be filtered through the following options. Only those connections that match the specified criteria are returned.

-matchlocaladdr HOSTLIST	Only returns those connections whose local address is one of those specified in HOSTLIST. Each element of HOSTLIST may be either an IP address or a host name.
-matchlocalport PORTNUMBER	Only returns those connections whose local port is the specified number.
-matchpid PID	Only returns those connections owned by the process with the specified PID. On platforms where the PID is not available, specifying this option will generate an error.

hostname_to_address HOSTNAME ?-async SCRIPT? ?-flushcache?

Attempts to map the specified host name to its IP addresses. Note there may be more than one address associated with a host name.

If the -async option is not specified, the command returns the list of IP addresses corresponding to the host if available and an empty list otherwise. Note that this is a blocking call and the Tcl event loop will not be run until the command returns.

If the -async option is specified, the command returns right away. The name resolution is done in the background and when completed, SCRIPT is called at the global scope. Three additional arguments are appended to the script before it is executed - HOSTNAME, status success or fail and either the list of IP addresses (when the status is success) or the Winsock error code (when the status is fail). The Winsock error code may be translated to an error string using the map_windows_error command. Note that on some platforms, if no addresses are found, callback may be invoked with a status of success and an empty list for the third argument, or it may be invoked with a status of fail and an appropriate error code.

Note the -async option requires a threaded build of Tcl and will raise an exception on non-threaded builds.

Internally, the command maintains a cache of address to hostname mappings so as to avoid unnecessary lookups. The result is normally returned from here if available. However, if the -flushcache option is specified, the cache entry is deleted and an explicit lookup up is done.

hwaddr_to_ipaddr HWADDR ?VARNAME?

Returns the IP address corresponding to the given hardware address. If VARNAME is specified, the command stores the result in a variable of that name in the caller's context if a mapping can be found and returns 1. Otherwise the command returns 0 without affecting the variable. If VARNAME is not specified, the command returns the IP address if a mapping is found and generates a Tcl exception otherwise.

ipaddr_to_hwaddr IPADDR ?VARNAME?

Returns the hardware address corresponding to the given IP address. If VARNAME is specified, the command stores the result in a variable of that name in the caller's context if a mapping can be found and returns 1. Otherwise the command returns 0 without affecting the variable. If VARNAME is not specified, the command returns the hardware address if a mapping is found and generates a Tcl exception otherwise.

port_to_service PORTNUMBER

Returns the service name (e.g. http) corresponding to the specified port number. If no corresponding service name exists, an empty string is returned.

service_to_port SERVICENAME

Returns the port number corresponding to the specified service name (e.g. http). If the service name is not defined, an empty string is returned. If SERVICENAME is a port number, it is returned.

terminate_tcp_connections ?options?

Terminates all connections that match all the options specified. Any options that are not specified are assumed to match. The valid matching options are:

-matchlocaladdr IPADDR	Only matches those connections whose local address is bound to IPADDR.
-matchlocalport PORTNUMBER	Only matches those connections whose local port is the specified number.
-matchpid PID	Only matches those connections owned by the process with the specified PID. On platforms where the PID is not available, specifying this option will generate an error.
-matchremoteaddr IPADDR	Only matches those connections whose remote address is bound to IPADDR.
-matchremoteport PORTNUMBER	Only matches those connections whose remote port is PORTNUMBER.
matchstate STATELIST	Only matches those connections whose state is one those specified in STATELIST which should be a list of connection state values. See get_tcp_connections for a list of valid values.

The system attempts to terminate the specified connections but no error is raised if the connection cannot be terminated. Caller should retrieve the list of connections to check if the termination was successful.

Network configuration

SYNOPSIS

DESCRIPTION

Overview

Commands

COPYRIGHT

TWAPI 3.0.29 Documentation