Security and access control

Commands related to authentication and access control

SYNOPSIS

package require twapi_security
append_acl_aces ACL ACELIST
check_enabled_privileges TOKEN PRIVILEGES ?-any?
close_token TOKEN
cred_delete TARGET ?TYPE?
cred_get TARGET ?TYPE?
cred_is_marshaled STR
cred_marshal TYPE CRED
cred_parse_username FQUN
cred_unmarshal MCRED
credentials ?TARGETPATTERN?
decode_security_descriptor SECDBIN
disable_all_token_privileges TOKEN
disable_privileges PRIVLIST
disable_token_privileges TOKEN PRIVLIST
enable_privileges PRIVLIST
enable_token_privileges TOKEN PRIVLIST
encode_security_descriptor SECD
equal_sids SIDA SIDB
eval_with_privileges SCRIPT PRIVLIST
find_logon_sessions ?options?
get_ace_inheritance ACE
get_ace_rights ACE ?-resourcetype RESOURCETYPE? ?-raw?
get_ace_sid ACE
get_ace_text ACE ?-resourcetype RESOURCETYPE?
get_ace_type ACE
get_acl_aces ACL
get_acl_rev ACL
get_current_user ?FORMATOPTION?
get_logon_session_info SESSIONLUID ?options?
get_privilege_description PRIVILEGE
get_resource_integrity RESTYPE NAME ?options?
get_resource_security_descriptor RESTYPE NAME ?options?
get_security_descriptor_control SECD
get_security_descriptor_dacl SECD
get_security_descriptor_group SECD
get_security_descriptor_integrity SECD ?-label|-raw?
get_security_descriptor_owner SECD
get_security_descriptor_sacl SECD
get_security_descriptor_text SECD ?-resourcetype RESOURCETYPE?
get_sid_domain SID
get_token_default_dacl TOKEN
get_token_elevation TOKEN
get_token_groups TOKEN ?-name?
get_token_groups_and_attrs TOKEN
get_token_impersonation_level TOKEN
get_token_info TOKEN ?options?
get_token_integrity TOKEN ?-raw | -label?
get_token_integrity_policy TOKEN
get_token_linked_token TOKEN
get_token_origin TOKEN
get_token_owner TOKEN ?-name?
get_token_primary_group TOKEN ?-name?
get_token_privileges TOKEN ?-all?
get_token_privileges_and_attrs TOKEN
get_token_restricted_groups_and_attrs TOKEN
get_token_source TOKEN
get_token_statistics TOKEN
get_token_tssession TOKEN
get_token_type TOKEN
get_token_user TOKEN ?-name?
get_token_virtualization TOKEN
impersonate_self IMPERSONATIONLEVEL
impersonate_token TOKEN
impersonate_user USERNAME PASSWORD ?options?
is_valid_luid_syntax LUID
is_well_known_sid SID KNOWNSIDNAME
map_luid_to_privilege LUID ?-system SYSTEMNAME? ?-mapunknown?
map_privilege_to_luid PRIVILEGE ?-system SYSTEMNAME? ?-mapunknown?
new_ace ACETYPE ACCOUNT ACCESSRIGHTS ?options?
new_acl ?ACELIST?
new_luid
new_restricted_dacl ACCOUNTS RIGHTS ?options?
new_security_descriptor ?options?
open_process_token ?-pid PID | -hprocess HPROCESS? ?-access DESIREDACCESS?
open_thread_token ?-tid TID | -hthread HTHREAD? ?-access DESIREDACCESS? ?-self BOOLEAN?
open_user_token USERNAME PASSWORD ?options?
prepend_acl_aces ACL ACELIST
reset_thread_token
revert_to_self
sddl_to_security_descriptor SECD
security_descriptor_to_sddl SECD
set_ace_inheritance ACE ?options?
set_ace_rights ACE ACCESSRIGHTS
set_ace_sid ACE ACCOUNT
set_ace_type ACE ACETYPE
set_acl_aces ACL ACELIST
set_resource_integrity RESTYPE NAME INTEGRITYLEVEL INTEGRITYPOLICY ?options?
set_resource_security_descriptor RESTYPE NAME SECD ?options?
set_security_descriptor_dacl SECD ACL ?DEFAULTED?
set_security_descriptor_group SECD ACCOUNT ?DEFAULTED?
set_security_descriptor_integrity SECD INTEGRITYLEVEL INTEGRITYPOLICY ?options?
set_security_descriptor_owner SECD ACCOUNT ?DEFAULTED?
set_security_descriptor_sacl SECD ACL ?DEFAULTED?
set_thread_token TOKEN
set_token_integrity TOKEN INTEGRITYLEVEL
set_token_integrity_policy TOKEN ?no_write_up? ?new_process_min?
set_token_virtualization TOKEN ENABLE
sids_from_same_domain SIDA SIDB
sort_aces ACELIST
sort_acl_aces ACL
well_known_sid KNOWNSIDNAME ?-domainsid DOMAINSID?

DESCRIPTION

This module provides procedures related to security and access control in Windows operating systems.

This documentation is reference material that assumes familiarity with Windows security terms and concepts. For more introductory material and guide, see the Windows Security chapter in the Tcl on Windows online book.

Security Identifiers

Each trustee (user, group, logon session etc.) is identified by a security identifier (SID). equal_sids compares two SIDs for equality while sids_from_same_domain checks if two SIDs belong to the same domain. well_known_sid returns well known SIDs as defined by Microsoft and is_well_known_sid checks if a given SID is one of these well known SIDs. get_sid_domain returns the SID of the domain containing a specified SID.

Locally Unique Identifiers

A Locally Unique Identifier (LUID) is a string generated by the command new_luid that is guaranteed to be unique on that system for that boot session. Unique means it will not be generated by some other call to that command.

Access Tokens and Privileges

An access token is associated with a process or a thread and contains various elements that determine the security context for the process or thread.

The commands open_process_token and open_thread_token retrieve the access tokens associated with a process and thread respectively. An access token for a specific user account may be obtained using open_user_token. The returned tokens can be passed to other functions to retrieve or set information for the process or thread's privileges and other security related information. When no longer required, the tokens must be passed to close_token in order to release resources.

The command get_token_info retrieves information from a token. Individual pieces of the token can also be retrieved via commands get_token_user, get_token_default_dacl, get_token_origin, get_token_groups, get_token_primary_group, get_token_owner, get_token_tssession, get_token_groups_and_attrs and get_token_restricted_groups_and_attrs.

The commands get_token_privileges, check_enabled_privileges and get_token_privileges_and_attrs retrieve information related to the privileges associated with a token. The commands enable_token_privileges, disable_token_privileges and disable_all_token_privileges allow manipulation of the same. Similarly, enable_privileges and disable_privileges can be used to enable and disable privileges for the current process. eval_with_privileges evaluates a script after enabling specified privileges.

The command get_privilege_description returns a description of a privilege. An empty string is returned if the specified privilege is not a known privilege.

The commands get_token_type and get_token_impersonation_level return information related to impersonation.

get_token_source returns the source of a token. get_token_statistics returns various other pieces of information, such as expiration, memory usage etc.

The commands map_luid_to_privilege and map_privilge_to_luid map LUID's to privilege names. The command is_valid_luid_syntax can be used to check the syntactic validity of a LUID.

Impersonation

Windows allows a thread or process to impersonate a user different from the account in which it was started (given the proper privileges). The functions for impersonation and reverting back are impersonate_token, impersonate_user, impersonate_self, set_thread_token and revert_to_self. For impersonating named pipe clients, use the impersonate_namedpipe_client command from the twapi_namedpipe package.

The command get_current_user returns the user account for the thread taking into consideration any ongoing impersonation.

Impersonation may be done at several levels. These levels control the degree to which the impersonator takes on the identity of the impersonated client. The following constants define the different levels:

anonymous The impersonating process cannot obtain identification information about the client or impersonate it.
identification The impersonating process cannot impersonate the client (ie. access resources using the client's credentials) but can obtain identity and privilege information about the client. This can be used for controlling access to its own objects (as opposed to operating system resources).
impersonation The impersonating process can impersonate the client only on the local system. The client credentials cannot be used to access other resources on the network.
delegation The impersonating process can use the client's credentials for accessing network resources.

Access Rights

Access rights in the Windows API take the form of a bit mask with each bit signifying a specific desired or granted right. Access rights may be specified to TWAPI functions in the form of a single element or list of elements, each of which is an integer or a symbolic constant. The access rights bit mask passed to the underlying function is formed by OR'ing together the individual elements in the list. In the case of a symbolic constant, the access right is mapped to the appropriate bits before being OR'ed with the other elements.

The following symbolic constants define generic access rights that are mapped by each object type into its own specific rights: generic_read, generic_write, generic_execute and generic_all.

The following symbolic constants define access rights that are common to all securable object types: delete, read_control, write_dac, write_owner, synchronize, standard_rights_read, standard_rights_write, standard_rights_execute, standard_rights_required and standard_rights_all. Some APIs will also accept maximum_allowed to indicate the the maximum permitted access to the resource for the process is desired. Refer to the Windows SDK for a definition of these access rights.

In addition to the standard rights, specific object types may have other access rights associated with them as described in the following table.

COM com_rights_execute, com_rights_execute_local, com_rights_execute_remote, com_rights_activate_local, com_rights_activate_remote
Desktops desktop_readobjects, desktop_createwindow, desktop_createmenu, desktop_hookcontrol, desktop_journalrecord, desktop_journalplayback, desktop_enumerate, desktop_writeobjects, desktop_switchdesktop
Events event_all_access, event_modify_state
Files file_all_access, file_generic_read, file_generic_write, file_generic_execute, file_read_data, file_write_data, file_append_data, file_read_ea, file_write_ea, file_execute, file_delete_child, file_read_attributes, file_write_attributes
Mutexes mutex_all_access, mutex_modify_state
Named pipes file_all_access, file_read_data, file_write_data, file_create_pipe_instance, file_read_attributes, file_write_attributes
Processes process_all_access, process_terminate, process_create_thread, process_set_sessionid, process_vm_operation, process_vm_read, process_vm_write, process_dup_handle, process_create_process, process_set_quota, process_set_information, process_query_information, process_suspend_resume
Registry key_all_access, key_read, key_write, key_execute, key_query_value, key_set_value, key_create_sub_key, key_enumerate_sub_keys, key_notify, key_create_link, key_wow64_32key, key_wow64_64key, key_wow64_res
Semaphores semaphore_all_access, semaphore_modify_state
Services service_all_access, service_query_config, service_change_config, service_query_status, service_enumerate_dependents, service_start, service_stop, service_pause_continue, service_interrogate, service_user_defined_control
Threads thread_all_access, thread_terminate, thread_suspend_resume, thread_get_context, thread_set_context, thread_set_information, thread_query_information, thread_set_thread_token, thread_impersonate, thread_direct_impersonation
Timers timer_all_access, timer_query_state, timer_modify_state.
Tokens token_all_access, token_assign_primary, token_duplicate, token_impersonate, token_query, token_query_source, token_adjust_privileges, token_adjust_groups, token_adjust_default, token_adjust_sessionid.
Window stations winsta_enumdesktops, winsta_readattributes, winsta_accessclipboard, winsta_createdesktop, winsta_writeattributes, winsta_accessglobalatoms, winsta_exitwindows, winsta_enumerate, winsta_readscreen, winsta_all.

Note that some of the symbolic access rights are a combination of other access rights. For example, file_all_access includes all other rights associated with a file object. When an access rights list is returned from a command, it includes both the individual symbolic rights as well as all valid symbols for combined rights.

Access Control Entries

Several functions deal with access control entries (ACE) either directly or as part of the more complex structures. A new ACE may be created through the new_ace command. The structure of an ACE should be treated as opaque and the fields should be manipulated only through the access control entry functions. An access control entry contains the fields described below.

The type of an ACE may be one of the following values: allow, deny, audit, alarm, allow_compound, allow_object, deny_object, audit_object, alarm_object, allow_callback, deny_callback, allow_callback_object, deny_callback_object, audit_callback, alarm_callback, audit_callback_object, alarm_callback_object, mandatory_label. Currently, only the allow, deny and audit type ACE's are supported. The type of an ACE may be manipulated through the get_ace_type and set_ace_type commands.

Each ACE has an SID associated with it that indicates the user or group that the ACE applies to. This may be retrieved or set using the get_ace_sid and set_ace_sid functions.

The access rights granted or restricted by an ACE can be manipulated through the get_ace_rights and set_ace_rights functions.

An ACE may be recursively applied to objects within a container. This is controlled through the get_ace_inheritance and set_ace_inheritance commands.

The command sort_aces may be used to sort a list of ACE elements into the order recommended by Windows.

The command get_ace_text returns a textual description of an ACE.

Access Control List

An access control list (ACL) is an ordered list of access control entries that is applied to a resource. The command new_acl creates a new ACL with an optional set of ACE elements. For the common case of granting access only specific accounts, new_restricted_dacl provides a simpler and more convenient interface.

The commands get_acl_aces and set_acl_aces may be used to retrieve or set the access control entries in the ACL. Alternatively, the commands prepend_acl_aces and append_acl_aces may be used to place additional ACEs in front of or after, respectively, of the current entries in an ACL.

Access control lists are of two types - a discretionary access control list (DACL) controls the operations that may be invoked on a resource based on the identity of the accessor, while a system access control list (SACL) controls the audit events that are generated when the resource is accessed. A SACL should contain only ACE elements of types prefixed with audit or mandatory_label while a DACL should only contain ACE elements of other types.

The list of ACE elements in an ACL may be resorted to conform to the Windows recommended order through the sort_acl_aces command.

Security Descriptors

A security descriptor is associated with a resource and ties together various information that controls access to the resource including the SID of the owner of the resource, the SID of the primary group, a discretionary access control list (DACL) and a system access control list (SACL).

A new security descriptor may be created through the command new_security_descriptor.

The commands get_security_descriptor_owner, get_security_descriptor_group, set_security_descriptor_owner and set_security_descriptor_group retrieve and set the owner and group attributes of a security descriptor.

The commands get_security_descriptor_dacl, get_security_descriptor_sacl, set_security_descriptor_dacl and set_security_descriptor_sacl retrieve and set the DACL and SACL fields of a security descriptor. It is important to distinguish between the absence of a DACL (or SACL) in a security descriptor and an empty DACL (or SACL). The former results in everyone being allowed to access the object whereas the latter results in no one being allowed to access the object. When modifying or creating a security descriptor, pass the literal string null to indicate that the security descriptor has no DACL (or SACL). An empty DACL (or SACL) on the other hand is indicated simply by passing an ACL that does not contain any ACEs.

The command get_security_descriptor_control returns the control flags associated with the security descriptor.

Note that not all fields in a security descriptor need to be initialized. For example, to change the owner of a resource, you only need to create a descriptor with the owner field initialized either at creation time or through a subsequent call to set_security_descriptor_owner. Then this can be passed to the appropriate function to set a resource's security with an option indicating that only the owner field should be changed.

The security information associated with each resource type can be retrieved and modified through functions get_resource_security_descriptor and set_resource_security_descriptor.

The command get_security_descriptor_text returns a textual description of a security descriptor. Commands security_descriptor_to_sddl and sddl_to_security_descriptor can be used to convert security descriptors to SDDL format. Commands encode_security_descriptor and decode_security_descriptor encode and decode security descriptors to and from self-relative binary formats. This is useful in cases where security descriptors need to be stored in that format, for example in the registry.

Logon Sessions

A logon session is identified by an LUID and provides the context for a particular instance of an authenticated security principal where the principal may be a user, a computer, a service etc. A single principal, for example a user, may have multiple logon sessions concurrently present at any time. The command find_logon_sessions allows enumeration of logon sessions. The details associated with each can be obtained through the get_logon_session_info command.

Windows Credentials

The Windows credentials manager maintains a cache of credentials for a user account or logon session. The twapi_security package provides some additional commands to those already present in the twapi_base package.

The credentials returns a list containing the content of the credentials cache. The cred_get command returns cached credentials for a credential target. The cred_delete command deletes cached credentials. The commands cred_marshal, cred_unmarshal and cred_is_marshaled can be used for marshaling of credentials. The command cred_parse_username can be used to extract the user and domain names from a fully qualified user name.

User Account Control

Windows Vista and later versions include the User Account Control (UAC) feature that runs even adminstrator account processes with reduced privileges unless explicitly elevated by the user. The command get_token_elevation checks whether a particular process token is elevated or not. The command get_token_linked_token returns the token handle for the token that is linked to an elevated or limited token.

Similarly, the Windows Integrity mechanism attempts to distinguish between applications at different levels of trust and control access to resources accordingly. The commands get_token_integrity and set_token_integrity allow retrieving and setting the integrity level associated with a process token. Alternatively, the higher level commands get_process_integrity and set_process_integrity can also be used for this purpose.

The associated policy for maintaining integrity levels can be read and modified using get_token_integrity_policy and set_token_integrity_policy.

The integrity level associated with a resource can be retrieved and set using the commands get_resource_integrity and set_resource_integrity respectively. The integrity level stored in a security descriptor can be retrieved and set using get_security_descriptor_integrity and set_security_descriptor_integrity.

The above security mechanims also introduced compatibility issues for applications written for older versions of Windows which expected to be able to write to resources at higher integrity levels, such as the system directory, that were now restricted. To allow these applications to run, Windows silently virtualizes protected resources and redirects reads and writes to these resources from such applications. The get_token_virtualization can be used to detect if a process is virtualized in this fashion and set_token_virtualization can be used to enable or disable the state.

For a tutorial and discussion of these issues, refer to the MSDN article.

Commands

append_acl_aces ACL ACELIST
Appends the list of ACEs in ACELIST to the entries in the given ACL. Returns the modified ACL.
check_enabled_privileges TOKEN PRIVILEGES ?-any?
Without the -any option, the command returns 1 if the given list of privileges is enabled in the token, and 0 otherwise. If the option -any is specified, the command returns 1 if at least one of the privileges is enabled, and 0 otherwise. PRIVLIST is a list of privilege names or LUIDs.
close_token TOKEN
Frees resources associated with an access token.
cred_delete TARGET ?TYPE?
Deletes the credentials identified by TARGET from the credential cache associated with the logon session of the curent security token. The TYPE argument is one of generic, domain_password, domain_certificate, domain_visible_password, generic_certificate or domain_extended.
cred_get TARGET ?TYPE?
Returns the credentials identified by TARGET from the credential set associated with the logon session of the curent security token. The TYPE argument is one of generic, domain_password, domain_certificate, domain_visible_password, generic_certificate or domain_extended. The return value is a dictionary with the following keys:
attributes A list of credential attributes. Each attribute is a triplet consisting of a application-specific keyword, an integer flags (currently always 0) and a binary string whose format is application-dependent.
comment Any associated descriptive comment for the credential that might be added by the user.
lastwritten The last time the credentials were written as the number of 100ns since Jan 1, 1601 (see large_system_time_to_secs_since_1970).
persist One of the values session, local_machine or enterprise depending on whether the credentials are persisted for the current logon session only, or are persisted on the local system and are visible to future logon session for the user on that system, or are persisted on the local system and are visible to logon session for that user from other systems.
target The name of the target for which the credential is applicable.
targetalias An alias for the target.
type The credential type which is one of generic, domain_password, domain_certificate, domain_visible_password generic_certificate, domain_extended.
username The user name associated with the target credential.
The dictionary may contain other elements. These should be ignored and are liable to change.

For more information, see the description of the CREDENTIALS structure in the Windows SDK.
cred_is_marshaled STR
Returns a boolean true value if the string STR represents a credential in marshaled form and false otherwise.
cred_marshal TYPE CRED
Transforms the passed credential CRED into text string. TYPE should be either certificate or user. In former case, CRED should be the binary hash of the certificate as returned in the sha1_hash property of the cert_property command. In the latter case, it should be a string specifying the user name.
cred_parse_username FQUN
Parses a fully qualified user name FQUN and returns it as a user name and domain pair.
cred_unmarshal MCRED
Reverts a marshalled credential back to its original form. The return value is a pair consisting of the type and value. See cred_marshal.
credentials ?TARGETPATTERN?
Returns a list of current credentials from the credential cache. If TARGETPATTERN is not specified, all credentials are returned. Otherwise, only those with targets matching TARGETPATTERN are returned. TARGETPATERN is a name prefix optionally terminating in a wildcard * character.

The returned list elements are dictionaries containing credentials with keys as described for the cred_get command.
comment Any associated descriptive comment for the credential that might be added by the user.
lastwritten The last time the credentials were written as the number of 100ns since Jan 1, 1601 (see large_system_time_to_secs_since_1970).
persist One of the values session, local_machine or enterprise depending on whether the credentials are persisted for the current logon session only, or are persisted on the local system and are visible to future logon session for the user on that system, or are persisted on the local system and are visible to logon session for that user from other systems.
target The name of the target for which the credential is applicable.
targetalias An alias for the target.
type The credential type which is one of generic, domain_password, domain_certificate, domain_visible_password generic_certificate, domain_extended.
username The user name associated with the target credential.
The dictionary may contain other elements. These should be ignored and are liable to change.

For more information, see the description of the CREDENTIALS structure in the Windows SDK.
decode_security_descriptor SECDBIN
Decodes a self-relative security descriptor in binary format and returns it in the corresponding canonical Tcl format.
disable_all_token_privileges TOKEN
This command disables all privileges in the token. An error will be raised if the privilege does not exist or cannot be disabled because of lack of rights to the token handle.

The command returns a list of privileges that were modified by the command because they were not previously disabled. This list can be passed to enable_token_privileges to undo the privilege modifications made by this call.
disable_privileges PRIVLIST
This command disables one or more privileges in the current process. PRIVLIST is a list of privileges each of which may be either a symbolic privilege such as SeLoadDriverPrivilege or a LUID corresponding to a privilege.

An error will be raised if the privilege does not exist or cannot be disabled because of lack of rights to the token handle.

The command returns a list of privileges that were modified by the command because they were not previously disabled. This list can be passed to enable_privileges to undo the privilege modifications made by this call.
disable_token_privileges TOKEN PRIVLIST
This command disables one or more privileges in the token. PRIVLIST is a list of privileges each of which may be either a symbolic privilege such as SeLoadDriverPrivilege or a LUID corresponding to a privilege.

An error will be raised if the privilege does not exist or cannot be disabled because of lack of rights to the token handle.

The command returns a list of privileges that were modified by the command because they were not previously disabled. This list can be passed to enable_token_privileges to restore the token privileges to their original value.
enable_privileges PRIVLIST
This command enables one or more privileges in the current process. PRIVLIST is a list of privileges each of which may be either a symbolic privilege such as SeLoadDriverPrivilege or a LUID corresponding to a privilege.

An error will be raised if a privilege does not exist or cannot be enabled because of lack of rights to the token handle.

The command returns a list of privileges that were modified by the command because they were not previously enabled. This list can be passed to disable_privileges to undo the privilege modifications made by this call.
enable_token_privileges TOKEN PRIVLIST
This command enables one or more privileges in the token. PRIVLIST is a list of privileges each of which may be either a symbolic privilege such as SeLoadDriverPrivilege or a LUID corresponding to a privilege.

An error will be raised if a privilege does not exist or cannot be enabled because of lack of rights to the token handle.

The command returns a list of privileges that were modified by the command because they were not previously enabled. This list can be passed to disable_token_privileges to undo the privilege modifications made by this call.
encode_security_descriptor SECD
Encodes a security descriptor into a self-relative binary format and returns it.
equal_sids SIDA SIDB
If both arguments are valid SIDs, returns 1 if they are equal and 0 otherwise. Generates an error if either is not a valid SID.
eval_with_privileges SCRIPT PRIVLIST
The command enables the privileges specified in PRIVLIST, if they were not already enabled, and then evaluates SCRIPT in the caller's context. The command returns the result of SCRIPT after restoring the privileges in effect when the command was called.
find_logon_sessions ?options?
Returns a list of LUID values that identify the logon sessions on the system. By default, all logon sessions are returned. One or more of the following options may be specified to restrict the set of logon sessions that are returned.
-user ACCOUNT Only returns logon sessions for the specified user. ACCOUNT may be either the account name or the SID for the user.
-type SESSIONTYPELIST Only returns logon sessions that match one of the specified types. SESSIONTYPELIST is a list of integer logon session types defined in the Windows SDK or the following equivalent tokens: interactive, network, batch, service, proxy, unlockworkstation, networkclear, newcredentials, remoteinteractive, cachedinteractive, cachedremoteinteractive or cachedunlockworkstation.
-tssession TSSESSION Only returns those logon sessions belonging to the terminal services session identified by TSSESSION.
get_ace_inheritance ACE
Returns a flat list of "option value" pairs that indicate the inheritance characteristics of the ACE. The option elements are -self, -recursecontainers, -recurseobjects and -recurseonelevelonly as described in the documentation for new_ace. In addition, the read-only option -inherited indicates whether the ACE has been inherited from an ancestor or not.
get_ace_rights ACE ?-resourcetype RESOURCETYPE? ?-raw?
Returns a list of access rights contained within an ACE. This is a list of symbolic constants and bit masks as described in Access Rights. The option -resourcetype may be used to map the access rights to symbolic constants for a specific type of resource. RESOURCETYPE must be one of file, pipe, policy, process, registry, service, thread, token or winsta.

If the -raw option is specified, the access rights are returned as a single hex bitmask.
get_ace_sid ACE
Returns the SID of the given ACE.
get_ace_text ACE ?-resourcetype RESOURCETYPE?
Returns a textual description of the specified ACE. The option -resourcetype may be specified to indicate that the ACE is for a particular resource type. RESOURCETYPE must be one of the resource type values defined for the get_ace_rights command. This command is primarily useful for debugging and troubleshooting purposes.
get_ace_type ACE
Returns the type of the given ACE. See Access Control Entries for the possible types.
get_acl_aces ACL
Returns the ordered list of ACE elements in the given ACL.
get_acl_rev ACL
Returns the revision level of an ACL. Note that this is controlled by the ACEs in the ACL and cannot be set directly.
get_current_user ?FORMATOPTION?
Returns the user account for the current thread. If the thread is impersonating, this command returns the account being impersonated. Note this is not the same as the $::env(USERNAME) variable as the latter does not take impersonation into account. By default, the command returns the name of the user account in NT 4.0 SAM-compatible format. One of the following options may be specified to return the name in a different format:
-fullyqualifieddn Fully qualified Active Directory distinguished name.
-samcompatible NT 4.0 SAM account name (default).
-display Active Directory human-friendly display name.
-uniqueid Active Directory GUID format name. This is NOT the same as the SID.
-canonical Active Directory canonical format.
-userprincipal User principal format.
-canonicalex Active Directory canonical format except that the rightmost / is replaced by a newline.
-serviceprincipal Generalized service principal name.
-dnsdomain DNS domain followed by the SAM user name.
-sid User SID instead of name.


Note that all options except -samcompatible and -sid require that the system be part of a Active Directory domain, else an error is raised that no mapping to that format exists.
get_logon_session_info SESSIONLUID ?options?
Returns details for the logon session identified by SESSIONLUID. The information is returned as a flat list of option value pairs and depends on the specified options:
-all Returns the values for all options.
-authpackage Returns the name of the package that authenticated the session.
-dnsdomain Returns the DNS name for the owner of the logon session.
-logondomain Returns the name of the domain used to authenticate the session.
-logonid Returns the LUID for the session (same as SESSIONLUID).
-logonserver Returns the name of the server used to authenticate the session.
-logontime Returns the time session owner logged on.
-type Returns the logon session type (see find_logon_sessions).
-usersid Returns the SID for the session owner.
-tssession Returns the terminal session identifier for the logon session.
-user Returns the user name for the session owner.
-userprincipal Returns the user principal name for the session owner.
get_privilege_description PRIVILEGE
Returns a string description of the specified privilege.
get_resource_integrity RESTYPE NAME ?options?
Retrieves the integrity level associated with a resource. RESTYPE specifies the resource type and if option -handle is not specified, must be one of file, service (Windows service), printer, registry, share (Network shares) or kernelobj (kernel objects such as mutexes, semaphores and events). If option -handle is specified, then RESTYPE may also be one of windowstation, directoryservice, directoryserviceall, providerdefined, wmiguid or registrywow6432key but not share.

NAME specifies the name of the resource, for example, the path of a file unless option -handle is specified in which case it is the handle to the resource.

On systems that do not support integrity levels, the command returns an empty list. Otherwise, a list with two elements is returned. The first element of the list is the integrity value associated with the resource, by default represented as an integer value between 0 and 65535. If the option -raw is specified, the integrity level is returned as the raw SID value as stored internally by Windows in the token. Alternatively, if the -label option is specified the corresponding integrity level range label is returned which is one of untrusted (0-4095), low (4096-8191), medium (8192-12287, high (12288-16383) or system (anything higher).

The second element of the returned list is a list containing zero or or more of the following values: system_mandatory_label_no_write_up, system_mandatory_label_no_read_up, system_mandatory_label_no_execute_up. These control the operations allowed on the resource by processes with lower integrity levels. Refer to the Windows SDK for more details.
get_resource_security_descriptor RESTYPE NAME ?options?
Retrieves the security descriptor attached to a operating system resource. RESTYPE specifies the resource type and if option -handle is not specified, must be one of file, service (Windows service), printer, registry, share (Network shares) or kernelobj (kernel objects such as mutexes, semaphores and events). If option -handle is specified, then RESTYPE may also be one of windowstation, directoryservice, directoryserviceall, providerdefined, wmiguid or registrywow6432key but not share.

NAME specifies the name of the resource, for example, the path of a file unless option -handle is specified in which case it is the handle to the resource.

Without any options being specified, the returned security descriptor will contain only the owner, group and DACL fields. The SACL field will not contain valid data. The following options may be specified to control which fields are returned in the security descriptor:
-all Includes all fields in the security descriptor. This requires the caller to have the SeSecurityPrivilege privilege enabled.
-dacl Includes the DACL in the returned security descriptor.
-group Includes the group information in the returned security descriptor.
-owner Includes the owner information in the returned security descriptor.
-sacl Includes the SACL in the returned security descriptor. This requires the caller to have the SeSecurityPrivilege privilege enabled.
get_security_descriptor_control SECD
Returns the control flags contained in the given security descriptor SECD. The flags are returned as a list of zero or more tokens from the following: owner_defaulted, group_defaulted, dacl_present, dacl_defaulted, sacl_present, sacl_defaulted, dacl_auto_inherited, sacl_auto_inherited, dacl_protected, sacl_protected, rm_control_valid, self_relative. Refer to the Windows Platform SDK for details.
get_security_descriptor_dacl SECD
Returns the DACL contained in the given security descriptor SECD.
get_security_descriptor_group SECD
Returns the group SID for the given security descriptor SECD.
get_security_descriptor_integrity SECD ?-label|-raw?
Returns the integrity level stored in the given security descriptor SECD. Refer to get_resource_integrity for the option description and format of the returned value.
get_security_descriptor_owner SECD
Returns the owner SID for the given security descriptor SECD.
get_security_descriptor_sacl SECD
Returns the SACL contained in the given security descriptor SECD.
get_security_descriptor_text SECD ?-resourcetype RESOURCETYPE?
Returns a textual description of the specified security descriptor SECD. The option -resourcetype may be specified to indicate that the security descriptor is for a particular resource type. RESOURCETYPE must be one of the resource type values defined for the get_ace_rights command. This command is primarily useful for debugging and troubleshooting purposes.
get_sid_domain SID
Returns the SID of the domain containing the specified SID.
get_token_default_dacl TOKEN
Returns the DACL stored in the token which will be used as the defaulted DACL when a new resource is created with no security descriptor specified.
get_token_elevation TOKEN
On systems that support Windows UAC, this command returns one of default, full or limited depending on whether the token corresponds to a process is running with default privileges for the account, full (elevated) privileges for the account or limited (filtered) privileges. On systems that do not support UAC, the command always returns default.

To directly access the elevation level of a process, you can also use the get_process_elevation command or the -elevation option of the get_process_info command.
get_token_groups TOKEN ?-name?
Returns the list of group SID's for the token. If -name is specified, returns the group names instead of the SID's.
get_token_groups_and_attrs TOKEN
Returns the list of group SID's for the token together with the attributes for each group. The returned list is of the form SID ATTRIBUTELIST SID ATTRIBUTELIST... where ATTRIBUTELIST is a list of zero or more of the following attributes: enabled, enabled_by_default, logon_id, mandatory, owner, resource, integrity, integrity_enabled and use_for_deny_only. Refer to the Windows Platform SDK for details.
get_token_impersonation_level TOKEN
Gets the current impersonation level for the token. This may have one of the following values: anonymous, identification, impersonation, or delegation. See Impersonation for details.
get_token_info TOKEN ?options?
Returns a dictionary containing the token fields specified in options. The following fields may be requested:
-disabledprivileges Returns the list of privileges in the token that are currently disabled.
-elevation Returns the elevation level for the token (see get_process_elevation).
-enabledprivileges Returns the list of privileges that are enabled in the token.
-groupattrs Returns a dictionary whose keys are group SID's contained in the token, with the corresponding value being a list of attributes for the group.
-groups Returns the list of the names of groups included in the token. For domain accounts, an error is raised if the domain is unreachable or if an SID has no corresponding name. Use -groupsids to avoid this.
-groupsids Returns the list of SID's of the groups included in the token.
-integrity Returns the numeric integrity level associated with the token (see get_process_integrity).
-integritylabel Returns the label for the range for the integrity level associated with the token (see get_process_integrity).
-linkedtoken If TOKEN is an elevated or limited token, this command returns the corresponding limited or elevated token linked to it.
-logonsession Returns the LUID of the logon session associated with the token.
-logonsessionsid Returns the SID of the logon session associated with the token.
-primarygroup Returns the primary group for the token. For domain accounts, an error is raised if the domain is unreachable. Use -primarygroupsid to avoid this.
-primarygroupsid Returns the SID of primary group for the token.
-privileges Returns the list of enabled and disabled process privileges in the same format as get_token_privileges. Deprecated, use -enabledprivileges and -disabledprivileges instead.
-restrictedgroupattrs Returns a dictionary whose keys are SID's for the restricted groups contained in the token, with the corresponding value being a list of attributes for the group. See get_token_groups_and_attrs for details.
-restrictedgroups Returns the list of restricted groups in the token. For domain accounts, an error is raised if the domain is unreachable. Use -restrictedgroupattrs to avoid this.
-tssession Returns the terminal server session id of the process.
-usersid Returns the SID of the user account associated with the token.
-virtualized Returns true if the process associated with the token is virtualized and false otherwise. See virtualized_process.
get_token_integrity TOKEN ?-raw | -label?
On systems that support Windows UAC, this command returns the integrity level associated with the token. The integrity value is an integer value between 0 and 65535. If the option -raw is specified, the integrity level is returned as the raw SID value as stored internally by Windows in the token. Alternatively, if the -label is specified the corresponding integrity level range label is returned which is one of untrusted (0-4095), low (4096-8191), medium (8192-8447), mediumplus (8448-12287), high (12288-16383) or system (anything higher).

On systems that do not support integrity levels, this command always returns an appropriately formatted value corresponding to the medium integrity level.

To directly access the integrity level of a process, you can also use the get_process_integrity command or the -integrity option of the get_process_info command.
get_token_integrity_policy TOKEN
On systems that support Windows UAC, this command returns the integrity policy associated with the token. The integrity policy is a list containing zero or more values from table below.
no_write_up If present, writes to objects at a higher integrity level are denied.
new_process_min If present, new processes will be created at an integrity level that is the minimum of the integrity level of the token and the integrity level associated with the executable file of the new process.


On systems that do not support integrity levels, this command always returns an empty list indicating no integrity policy is in effect.
get_token_linked_token TOKEN
If TOKEN is an elevated or limited token, this command returns the corresponding limited or elevated token linked to it.
get_token_origin TOKEN
Returns the LUID of the logon session that created the logon session containing token TOKEN except if the token's logon resulted from network authentication in which case the command returns a zero LUID.
get_token_owner TOKEN ?-name?
Returns the SID of the entity (user, group, etc.) that will be used as the owner for objects created using this token. If -name is specified, the name of the entity is returned instead of the SID.
get_token_primary_group TOKEN ?-name?
Returns the SID of the group that will be used as the primary group for objects created using this token. If -name is specified, the name of the group is returned instead of the SID.
get_token_privileges TOKEN ?-all?
Returns the list of enabled privileges in the token. If the option -all is specified, returns a list of two sublists. The first containing the enabled privileges and the second the disabled privileges.
get_token_privileges_and_attrs TOKEN
Returns the list of privileges in the token together with the attributes for each. The returned list is of the form PRIVILEGE ATTRIBUTELIST PRIVILEGE ATTRIBUTELIST... where ATTRIBUTELIST is a list of zero or more of the following attributes: enabled, enabled_by_default and used_for_access.
get_token_restricted_groups_and_attrs TOKEN
Returns the list of restricted group SID's for the token together with the attributes for each group. The returned list is of the form SID ATTRIBUTELIST SID ATTRIBUTELIST... where ATTRIBUTELIST is a list of zero or more of the following attributes: enabled, enabled_by_default, logon_id, mandatory, owner, resource, integrity, integrity_enabled and use_for_deny_only. Refer to the Windows Platform SDK for details.
get_token_source TOKEN
Returns the source of an access token.
get_token_statistics TOKEN
Returns various token statistics as a list of field value pairs. The following fields are returned:
authluid The LUID for the session represented by the token.
expiration Expiration time for the token. Windows does not currently support expiration for access tokens.
dynamicavailable Number of free bytes available for storing default protection and primary group identifier for the token.
dynamiccharged Number of bytes allocated for storing default protection and primary group identifier for the token.
groupcount Number of group SID's included in the token.
impersonationlevel The impersonation level of the token. This value is only valid if the field type has the value impersonation.
luid An LUID that identifies the instance of the token.
modificationluid An LUID that changes every time the token is modified.
privilegecount The number of privileges (including disabled ones) that are included in the token.
type The type of the token - primary or impersonation.
get_token_tssession TOKEN
Returns the terminal server session id of the process.
get_token_type TOKEN
Returns the type of the token: either primary, or impersonation.
get_token_user TOKEN ?-name?
Returns the SID of the user account associated with the token. If -name is specified, returns the name of the account instead of its SID.
get_token_virtualization TOKEN
Returns true if the token indicates a virtualized process where the system redirects writes to protected file and registry locations and false otherwise. On systems that do not support UAC, the command will always return false.

To directly retrieve the virtualization status of a process, you can also use the virtualized_process command or the -virtualized option of the get_process_info command.
impersonate_self IMPERSONATIONLEVEL
Assigns an impersonation token to the current thread based on the security context of the process. The security characteristics of the thread can then be changed (for example by modifying the privileges of its token) without impacting the security context of the remaining threads in the process.

IMPERSONATIONLEVEL may have any of the values allowed for impersonation levels (see Impersonation).
impersonate_token TOKEN
Changes the security context of the calling thread to that of the user account associated with the specified token. TOKEN is a token returned from a command such as open_user_token, open_process_token or open_thread_token.

The caller must be careful that exceptions raised by this command are handled correctly. It should not continue with normal processing as though the security context was changed to that of the token.
impersonate_user USERNAME PASSWORD ?options?
Changes the security context of the calling thread to that of the specified user account. This is essentially a wrapper around open_user_token and impersonate_token. Refer to the documentation of open_user_token for a description of the arguments.

The caller must be careful that exceptions raised by this command are handled correctly. It should not continue with normal processing as though the security context was changed to that of the user.
is_valid_luid_syntax LUID
Returns if LUID is a syntactically valid LUID, else 0.
is_well_known_sid SID KNOWNSIDNAME
Returns 1 if SID is a well-known SID corresponding to KNOWNSIDNAME. See well_known_sid for values of KNOWNSIDNAME.
map_luid_to_privilege LUID ?-system SYSTEMNAME? ?-mapunknown?
Returns the privilege name corresponding to the given LUID. If LUID does not correspond to a system defined privilege, an exception is raised unless the -mapunknown option is specified. In this case, the command will return a string of the form Privilege-LUID. As a special case, if LUID is a privilege name (and not a LUID), returns it as is. The option -system may be used to specify a system as described in Standard Options.
map_privilege_to_luid PRIVILEGE ?-system SYSTEMNAME? ?-mapunknown?
Returns the LUID corresponding to the given privilege name. If PRIVILEGE does not correspond to a system defined privilege name or a constructed privilege name of the form Privilege-LUID, an exception is raised. As a special case, if PRIVILEGE is itself a LUID, it is returned. The option -system may be used to specify a system as described in Standard Options.
new_ace ACETYPE ACCOUNT ACCESSRIGHTS ?options?
Creates and returns a new ACE. ACETYPE is the type of the ACE and should be one of supported values described in Access Control Entries. The user or group that the ACE pertains to is given by ACCOUNT which may be either a name or a SID. ACCESSRIGHTS determines the rights to be granted or denied by the ACE and should be a list of one or more constants described in Access Rights.

The following options may be specified when creating an ACE:
-auditsuccess BOOLEAN Specified that the ACE should log permitted accesses to a resource. Ignored if the ACE type is not audit. Defaults to true.
-auditfailure BOOLEAN Specified that the ACE should log failed accesses to a resource. Ignored if the ACE type is not audit. Defaults to true.
-recursecontainers BOOLEAN If the specified value is 1, the ACE is also applied to all descendents of the object to which the ACE is attached that are themselves containers. For example, in the case of a file ACE, this would indicate that the ACE also apply to all subdirectories. If 0 (default), the ACE does not apply to descendents that are containers.
-recurseobjects BOOLEAN If the specified value is 1, the ACE is also applied to all descendents of the object to which the ACE is attached that are not themselves containers. For example, in the case of a file ACE, this would indicate that the ACE also apply to all files under all subdirectories below a directory but not to the subdirectories themselves. If 0 (default), the ACE does not apply to descendents that are not containers.
-recurseonelevelonly BOOLEAN If the specified value is 0 (default), the -recursecontainers and -recurseobjects options have effect at all levels below the container object to which the ACE is applied. If the value is 1, the ACE is only applied to the immediate children of the container object. This option has no effect if neither -recurseobjects nor -recursecontainers is specified.
-self BOOLEAN If the specified value is 1 (default), the ACE applies to the object to which it is attached. If the specified value is 0, then the created ACE does not apply to the object with which it is attached. In this case, it only applies to the descendents of that object as indicated by the other options.
new_acl ?ACELIST?
Returns a new ACL initialized. ACELIST may be optionally specified to prepopulate the ACL with a list of ACE elements.
new_luid
Returns a LUID.
new_restricted_dacl ACCOUNTS RIGHTS ?options?
Returns a new DACL where the access rights specified by RIGHTS are granted to the accounts included in ACCOUNTS. Other accounts are implicitly denied. Accounts may be specified using either the account names or SID's. RIGHTS is a list of symbolic constants and bit masks as described in Access Rights. Any additional options are passed to new_ace for creating the ACE's in the DACL.
new_security_descriptor ?options?
Returns a new security descriptor. The following options may be specified to initialize various fields of the security descriptor:
-owner ACCOUNT The owner field of the security descriptor is set to the SID for the specified account. ACCOUNT may be the SID itself or the name of the user or group account.
-group ACCOUNT The primary group field of the security descriptor is set to the SID for the specified account. ACCOUNT may be the SID itself or the name of the group.
-dacl ACL The DACL field of the security descriptor is set to ACL. If ACL is the string "null", no DACL will be present in the security descriptor.
-sacl ACL The SACL field of the security descriptor is set to ACL. If ACL is the string "null", no SACL will be present in the security descriptor.
open_process_token ?-pid PID | -hprocess HPROCESS? ?-access DESIREDACCESS?
Returns a process token that can passed to other functions for querying and modifying security related data for a process. By default, the current process is assumed. The options -hprocess or -pid options may be used to retrieve the token for another process by passing a handle to it or its PID.

The -access option may be used to specify a list of desired access rights. If this option is not specified, access rights default to token_query. See Access Rights for a description of the format of this list and for a description of standard access rights.

In addition, the following symbols may be specified in the list: token_adjust_default, token_adjust_groups, token_adjust_privileges, token_adjust_sessionid, token_assign_primary, token_duplicate, token_execute, token_impersonate, token_query, token_query_source, token_read, token_write and token_all_access. See the documentation of OpenProcessToken in the Windows SDK for a description of each of these.

When no longer required, this token must be passed to close_token.
open_thread_token ?-tid TID | -hthread HTHREAD? ?-access DESIREDACCESS? ?-self BOOLEAN?
Returns a thread access token that can passed to other functions for querying and modifying security related data for a thread. By default, the current thread is assumed. The options -hthread or -tid options may be used to retrieve the token for another thread by passing a handle to it or its TID.

Note that the command will generate an error if the thread does not have a token. In this case, ::errorCode facility and code are set to WINDOWS and 1008 respectively. The caller can retrieve the process token instead.

The -access option specifies the desired access mode. See open_process_token for more details.

The -self option controls whether the access check is to be made against the security context of the thread or against the security context of the process. If specified as false, the security context of the thread is used, else that of the process.

When no longer required, this token must be passed to close_token.
open_user_token USERNAME PASSWORD ?options?
Returns a token corresponding to a logon session for the USERNAME account. This token may be used for impersonation or starting processes under a different account. When no longer required, this token must be passed to close_token.

USERNAME is the name of the account and may be specified either as just the account name, or in UPN format as user@DNS_domain_name.

The following options may be specified:
-domain DOMAIN Specifies the domain for the user. This option must not be specified if USERNAME is in UPN format user@DNS_domain_name which includes a domain name. If USERNAME is not in UPN format and -domain is not specified, the account validation is done only using the local account database.
-type LOGONTYPE Indicates the logon type. LOGONTYPE must be one of batch, interactive, network, network_cleartext, new_credentials, service or unlock. Refer to the Windows SDK documentation of LogonUser for details.
-provider PROVIDER Selects a logon provider. PROVIDER must be one of winnt50, winnt40 or winnt35. If this option is not specified, the operating system picks the standard (version dependent) logon provider for the system. Specify winnt40 to select the NTLM provider and winnt50 (only valid for Windows 2000 and up) for the negotiate logon provider.
prepend_acl_aces ACL ACELIST
Prepends the list of ACEs in ACELIST to the entries in the given ACL. Returns the modified ACL.
reset_thread_token
Ends the current thread's impersonation state.
revert_to_self
Calling this function will restore the original security context for the process thereby ending any impersonation initiated by prior impersonation commands such as impersonate_user.

Any exceptions raised by this command will result in the process continuing to run in the impersonation context. This is dangerous from a security perspective and the caller should normally immediately exit.
sddl_to_security_descriptor SECD
Parses a SDDL string and returns the corresponding security descriptor.
security_descriptor_to_sddl SECD
Returns the specified security descriptor in SDDL string format.
set_ace_inheritance ACE ?options?
Returns a new ACE constructed from ACE with inheritance attributes defined by options. These may be one or more of -self, -recursecontainers, -recurseobjects and -recurseonelevelonly as described in the documentation for new_ace.
set_ace_rights ACE ACCESSRIGHTS
Returns a new ACE containing the access rights specified in ACCESSRIGHTS. This should be a list of symbolic constants and bit masks as described in Access Rights.
set_ace_sid ACE ACCOUNT
Returns a new ACE constructed from ACE but with its SID field set to be the SID for account ACCOUNT. ACCOUNT may be either the name or the SID of a user or group account.
set_ace_type ACE ACETYPE
Returns a new ACE constructed from ACE but with the type ACETYPE. See Access Control Entries for valid values of ACETYPE.
set_acl_aces ACL ACELIST
Sets the list of ACEs within an ACL to those given in ACELIST. Returns the modified ACL.
set_resource_integrity RESTYPE NAME INTEGRITYLEVEL INTEGRITYPOLICY ?options?
Sets the integrity level associated with a resource. See set_security_descriptor_integrity for a description of the INTEGRITYLEVEL and INTEGRITYPOLICY parameters and the options -recurseobjects and -recursecontainers. See set_resource_security_descriptor for description of RESTYPE, NAME and the -handle option.
set_resource_security_descriptor RESTYPE NAME SECD ?options?
Modifies the security descriptor attached to a operating system resource. RESTYPE specifies the resource type and if option -handle is not specified, must be one of file, service (Windows service), printer, registry, share (Network shares) or kernelobj (kernel objects such as mutexes, semaphores and events). If option -handle is specified, then RESTYPE may also be one of windowstation, directoryservice, directoryserviceall, providerdefined, wmiguid or registrywow6432key but must not be share.

NAME specifies the name of the resource, for example, the path of a file unless option -handle is specified in which case it is the handle to the resource.

The fields of the resource's security descriptor are modified based on the contents of SECD. At lease one of the options -all, -owner, -group, -dacl, -sacl or -mandatory_label must be specified. The specific fields modified depend on the options specified:
-all All fields in the security descriptor are modified. This requires the caller to have the SeSecurityPrivilege privilege enabled.
-owner The resource's owner is modified.
-group The resource's group is modified.
-dacl Changes the DACL attached to the resource.
-sacl Changes the SACL attached to the resource. This requires the caller to have the SeSecurityPrivilege privilege enabled.
-protect_dacl If this option is specified, the resource will not inherit any DACL's from its parent. Otherwise, the parent's DACL's flow down to the resource. This option only has effect if the -dacl option is specified. This option cannot be specified with -unprotect_dacl. If neither is specified, the current DACL inherit settings are preserved.
-protect_sacl If this option is specified, the resource will not inherit any SACL's from its parent. Otherwise, the parent's SACL's flow down to the resource. This option only has effect if the -sacl option is specified. This option cannot be specified with -unprotect_sacl. If neither is specified, the current SACL inherit settings are preserved.
-unprotect_dacl If this option is specified, the resource will inherit any DACL's from its parent. This option only has effect if the -dacl option is specified. This option cannot be specified with -protect_dacl. If neither is specified, the current DACL inherit settings are preserved.
-unprotect_sacl If this option is specified, the resource will inherit any SACL's from its parent. This option only has effect if the -sacl option is specified. This option cannot be specified with -protect_sacl. If neither is specified, the current SACL inherit settings are preserved.
set_security_descriptor_dacl SECD ACL ?DEFAULTED?
Returns a security descriptor identical to SECD except for the DACL field which is set to ACL. If ACL is the string "null", the security descriptor is set to have no DACL. If ACL is an empty list, the security descriptor has an empty DACL, which is not the same not having a DACL. The boolean argument DEFAULTED (default false) should be true if the DACL is to marked as having been set by a default mechanism as opposed to being explicitly set.
set_security_descriptor_group SECD ACCOUNT ?DEFAULTED?
Returns a security descriptor identical to SECD except for the group field which is set to the SID for account ACCOUNT. ACCOUNT may be the SID itself or the name of the group. The boolean argument DEFAULTED (default false) should be true if the group is to marked as having been set by a default mechanism as opposed to being explicitly set.
set_security_descriptor_integrity SECD INTEGRITYLEVEL INTEGRITYPOLICY ?options?
Returns a new security descriptor based on SECD with the specified integrity. INTEGRITYLEVEL may be specified in one of the forms described in get_resource_integrity. INTEGRITYPOLICY is a list of one or more of the following: system_mandatory_label_no_write_up, system_mandatory_label_no_read_up, system_mandatory_label_no_execute_up. These control the operations allowed on the resource by processes with lower integrity levels. Refer to the Windows SDK for more details.

The following options may also be specified with the command:
-recursecontainers BOOLEAN If the specified value is 1, the integrity is also applied to all descendents of the object to which the security descriptor is attached that are themselves containers. If 0 (default), the integrity is not inherited by descendents that are containers.
-recurseobjects BOOLEAN If the specified value is 1, the integrity is also applied to all descendents of the object to which the security descriptor is attached that are not themselves containers. If 0 (default), the integrity does not apply to descendents that are not containers.
set_security_descriptor_owner SECD ACCOUNT ?DEFAULTED?
Returns a security descriptor identical to SECD except for the owner field which is set to the SID for account ACCOUNT. ACCOUNT may be the SID itself or the name of the user or group. The boolean argument DEFAULTED (default false) should be true if the owner is to marked as having been set by a default mechanism as opposed to being explicitly set.
set_security_descriptor_sacl SECD ACL ?DEFAULTED?
Returns a security descriptor identical to SECD except for the SACL field which is set to ACL. If ACL is the string "null", the security descriptor is set to have no SACL. The boolean argument DEFAULTED (default false) should be true if the SACL is to marked as having been set by a default mechanism as opposed to being explicitly set.
set_thread_token TOKEN
Changes the security context of the current thread by associating it with the given token. This is generally used in combination with open_thread_token to implement an impersonation stack.
set_token_integrity TOKEN INTEGRITYLEVEL
On systems that support Windows UAC, this command sets the integrity level for a token. INTEGRITYLEVEL must be an integer value between 0 and 65535, a a SID value defined for a integrity level by Windows, or one of untrusted (0), low (4096), medium (8192), mediumplus (8448), high (12288) or system.

On systems that do not support integrity levels, this command will raise an error unless the integrity level specified corresponds to medium integrity 8192, medium or S-1-16-8192. To directly set the integrity level of a process, you can also set_process_integrity command.
set_token_integrity_policy TOKEN ?no_write_up? ?new_process_min?
On systems that support Windows UAC, this command sets the integrity policy associated with the token. See get_token_integrity_policy for the meaning of no_write_up and new_process_min.
set_token_virtualization TOKEN ENABLE
Enables or disables virtualization of file and registry accesses depending on the boolean value of ENABLE. If this call is made on a system that does not support UAC, ENABLE must be false else an exception will be generated. The token must have been opened with token_adjust_default access.
sids_from_same_domain SIDA SIDB
Returns 1 if both specified SIDs belong to the same domain and 0 otherwise. Generates an error if either is not a valid SID.
sort_aces ACELIST
Although not enforced by the operating system, Windows has a recommended order in which multiple ACEs should be applied. The sort_aces command takes a list of ACE elements and returns a list that has been sorted as per the Windows recommendation. This sort order places all inherited ACEs after all non-inherited ACEs. Within each group, deny ACEs are placed before allow ACEs.
sort_acl_aces ACL
Rearranges the ACEs in the given ACL to conform to the Windows recommended order. Returns the modified ACL.
well_known_sid KNOWNSIDNAME ?-domainsid DOMAINSID?
Returns the well known SID corresponding to KNOWNSIDNAME. The -domainsid option specifies the domain to use to create the SID. If unspecified, the local computer is used. KNOWNSIDNAME may be one of the following : null, world, local, creatorowner, creatorgroup, creatorownerserver, creatorgroupserver, ntauthority, dialup, network, batch, interactive, service, anonymous, proxy, enterprisecontrollers, self, authenticateduser, restrictedcode, terminalserver, remotelogonid, logonids, localsystem, localservice, networkservice, builtindomain, builtinadministrators, builtinusers, builtinguests, builtinpowerusers, builtinaccountoperators, builtinsystemoperators, builtinprintoperators, builtinbackupoperators, builtinreplicator, builtinprewindows2000compatibleaccess, builtinremotedesktopusers, builtinnetworkconfigurationoperators, accountadministrator, accountguest, accountkrbtgt, accountdomainadmins, accountdomainusers, accountdomainguests, accountcomputers, accountcontrollers, accountcertadmins, accountschemaadmins, accountenterpriseadmins, accountpolicyadmins, accountrasandiasservers, ntlmauthentication, digestauthentication, schannelauthentication, thisorganization, otherorganization, builtinincomingforesttrustbuilders, builtinperfmonitoringusers, builtinperfloggingusers, builtinauthorizationaccess, builtinterminalserverlicenseservers, builtindcomusers, builtiniusers, iuser, builtincryptooperators, untrustedlabel, lowlabel, mediumlabel, highlabel, systemlabel, writerestrictedcode, creatorownerrights, cacheableprincipalsgroup, noncacheableprincipalsgroup, enterprisereadonlycontrollers, accountreadonlycontrollers, builtineventlogreadersgroup, newenterprisereadonlycontrollers, builtincertsvcdcomaccessgroup, mediumpluslabel, locallogon, consolelogon, thisorganizationcertificate, applicationpackageauthority, builtinanypackage, capabilityinternetclient, capabilityinternetclientserver, capabilityprivatenetworkclientserver, capabilitypictureslibrary, capabilityvideoslibrary, capabilitymusiclibrary, capabilitydocumentslibrary, capabilitysharedusercertificates, capabilityenterpriseauthentication, capabilityremovablestorage. See http://msdn.microsoft.com/en-us/library/windows/desktop/aa379650(v=vs.85).aspx for meaning of each name. In many cases, the command will also accept the name of the account on US English systems in lieu of the above tokens. For example, you can specify Administrators instead of builtinadministrators.

COPYRIGHT

Copyright © 2003-2010, Ashok P. Nadkarni

Tcl Windows API 4.6.0